Using Global Protect:
Launch Global Protect from task bar
Enter portal address “vpn.utah.edu” and click Connect
**Please note, if you have already connected you will not need to re-enter the portal address every time and can just press Connect
Log in using your UNID and password
**Once signed in, you will receive a DUO push to your default device. once approved, you will be signed in to the VPN. You can confirm this but the checkmark on top of the GlobalProtect item in the task bar.*
 |
|---|
 |
 |
| Info |
|---|
If you’ve been given explicit instructions to use Cisco AnyConnect from IT, use these following instructions: |
Using Cisco AnyConnect:
Launch "Cisco AnyConnect VPN Client" found in the Windows Start menu
Select or enter "vpnaccess.utah.edu" and click "Connect".
Fill subsequent fields as follows:
"Group": 2FA-DuoSecurity.
"Username" or "uNID": Your UNID.
(Unless you have been specifically told otherwise)"Password": Your UNID password.
"Second Password": "push"
Click “OK”
“Approve” when prompted by DUO Mobile App on your phone.
When prompted, click "Accept" to terms.
AnyConnect should now show "connected" as your VPN status.
Step 2
Step 3
